If you source boat covers or bimini tops for North America or Europe, you may have noticed the growing attention on PFAS in outdoor and textile products. Regulations such as California's AB 1817 and the EU's proposed broad PFAS restriction under REACH reflect this wider shift toward reducing the use of certain fluorinated chemicals. Product coverage varies by regulation. Notably, California's AB 1817 expressly excludes boat covers as vessel components from its definition of textile articles, while the EU's broader PFAS restriction remains under evaluation.

For marine fabric suppliers, the challenge is not simply replacing fluorinated water-repellent finishes. It is maintaining the water resistance that boat owners expect. At Easepal, we have worked on a practical combination of fluorine-free C0 DWR and a modified PU coating, supported by third-party fluorine test reports for selected fabric specifications.

The Challenge: Maintaining Water Resistance Without Fluorinated Finishes

Fluorinated durable water-repellent treatments have traditionally been used to help textile surfaces shed water. As buyer expectations evolve, manufacturers are evaluating alternatives that avoid intentionally added fluorinated water repellents.

One technical challenge is maintaining the desired surface water repellency and overall waterproof performance when switching to fluorine-free finishes. A surface finish alone may not provide the level of water resistance required for marine covers.

For marine applications, buyers should therefore look beyond the water-beading effect and consider the complete fabric construction, including its backing coating and hydrostatic resistance.

Three questions are worth considering:

  • How well does the surface finish maintain water beading after weather exposure?
  • Does the coated material provide the hydrostatic resistance required for the intended storage or mooring conditions?
  • Are the fabric construction and test results consistent with the product's intended use?

The goal is to choose a material solution that addresses environmental considerations while still doing the basic job of protecting a boat.

How We Fixed It: A Simple, Two-Layer Setup

At Easepal, our approach is to combine a fluorine-free C0 DWR surface finish with a modified polyurethane (PU) backing coating, so that surface repellency and the waterproof barrier perform different roles.

Instead of relying on one finish to do everything, the material uses two complementary layers:

  • On the outside (C0 DWR finish): A fluorine-free durable water-repellent finish helps water bead on the fabric surface and run off.
  • On the inside (modified PU barrier): A polyurethane (PU) coating is applied to the back of the woven polyester to provide a waterproof barrier and help prevent water from passing through the material.

The tested product achieves a hydrostatic head of approximately 1,200 mm water column.

This provides buyers with a practical reference point when evaluating the product's water resistance.

The Test Results: Fluorine Not Detected Above 30 mg/kg

To provide buyers with material data, Easepal has obtained third-party laboratory test reports for its 150D, 300D, and 600D boat cover fabrics. The 600D report identifies the sample as Boat Cover Fabric 600D and records testing with reference to BS EN 14582.

For the 600D sample, the report lists fluorine (F) as the test item, oxygen-bomb combustion as the sample preparation approach, and ion chromatography (IC) as the measuring instrument. The method detection limit (MDL) is 30 mg/kg, and the reported result is N.D. (not detected).

For the tested 600D sample, fluorine was not detected above the laboratory's stated method detection limit of 30 mg/kg.

Third-party fluorine test reports are available for Easepal's 150D, 300D, and 600D boat cover fabrics. Easepal can also work with customers to arrange additional testing based on specific product requirements and agreed test items.

Quick Snapshot: Easepal Marine Fabric Options and Test Results

ItemEasepal Specification / Test Result
Lab Test MethodFluorine test using a method referenced to BS EN 14582:2007, as specified by the client; oxygen-bomb combustion + ion chromatography (IC)
600D Fluorine ResultN.D. (Not Detected); method detection limit (MDL): 30 mg/kg
Waterproof LayerModified polyurethane (PU) backing coating
Hydrostatic ResistanceApproximately 1,200 mm water column, based on actual product testing
Fabric Range210D, 300D, 420D, 600D, and heavy-duty 1200D polyester
Available Fluorine Test ReportsThird-party reports available for 150D, 300D, and 600D boat cover fabrics; additional testing can be coordinated with customers upon request

Full Range: 210D to Heavy-Duty 1200D

Different markets and applications call for different fabric weights and constructions. Some buyers prioritize lighter covers that are easy to handle, while others need heavier materials for more demanding storage and mooring conditions.

Easepal's boat cover fabric options include:

  • 210D & 300D: Lighter-weight options for seasonal protection and general storage.
  • 420D & 600D: Mid- to heavier-weight options for buyers seeking a balance of handling, durability, and protection.
  • 1200D: A heavy-duty option for applications where a heavier fabric construction is preferred.

Depending on the product and intended use, fabric constructions may use a PU waterproof backing or PVC-based options. Buyers should compare the complete material specification and relevant test data rather than relying on denier alone.

Quick Q&A for Marine Buyers

Q1: Does Easepal provide fluorine test reports for its marine fabrics?

A: Yes. Easepal has third-party fluorine test reports for its 150D, 300D, and 600D boat cover fabrics. In the 600D report, fluorine (F) was not detected (N.D.) above the method detection limit of 30 mg/kg. The report references BS EN 14582:2007 and uses oxygen-bomb combustion with ion chromatography (IC).

Q2: What hydrostatic head does the tested product achieve?

A: The tested product achieves a hydrostatic head of approximately 1,200 mm water column.

Q3: Can Easepal support additional testing for customer projects?

A: Yes. In addition to the available third-party fluorine test reports for 150D, 300D, and 600D boat cover fabrics, Easepal can coordinate with customers on further testing based on their product requirements and agreed test items.

Ready for Your Next Production Run

If you're planning your marine accessory catalog, material selection should balance the protection your customers expect with clear information about fabric specifications and available test results.

We can support your line with:

  • Heavy-Duty Boat Covers: Universal and semi-custom cuts across our boat cover product range for bass boats, pontoons, and center consoles.
  • Marine Bimini Tops: 2-Bow, 3-Bow, and 4-Bow frame options, with fabric and finish choices available in our bimini top catalog.
  • Full OEM / Private Label: Your colors, your logo, your custom packaging.
  • Testing Support: Third-party fluorine test reports are available for 150D, 300D, and 600D boat cover fabrics. We can also coordinate additional testing according to customer requirements.

Questions about specs or samples? Drop us a note on our Contact Page or email us directly at info@easepal.com. We'll get back to you with specs and material swatches.

Share this article:
← Previous Article How to Choose the Right Boat Fender: Types, Sizing, Placement and Maintenance